This is default featured slide 1 title
This is default featured slide 2 title
This is default featured slide 3 title
This is default featured slide 4 title
This is default featured slide 5 title
 

Monthly Archives: November 2017

Tyres Can Save Fuel

Tyres are engineered to give the driver a smoother ride. Every day they design a tyre with a tread or material that can be used to make your drive less bumpy and rough.

The main factors that cause a high usage of fuel are the heavier cars. Not only does the shaft have to give a great force to pull the car along but it also has to be able to grip onto the surface.

When it comes to the faster, higher performing cars the tyres need to have more contact with the floor and a narrower tread. Although these cars already use quite an amount of fuel, the tyres will help the car from consuming too much.

The less you have to rev your car the less fuel will be used in the process of driving. An example of over-revving would be accelerating the car over 3000 RPM when it’s not necessary. Some cars won’t need to use all this power because their cars grip to the floor and tar very well.

When it rains you will notice that your car will slip and slide especially if you don’t have the correct tyres for that kind of weather. If there is no way for the water to escape through the tyre it will cause the car to slide. You will automatically put foot down on the brakes to avoid slipping. This is another reason how fuel can be wasted. The correct tyres will allow the car to travel normally in wet conditions with minimal skidding.

The amount of fuel used is also up to you and how responsible you are when you drive. For example, if you are driving at a normal speed you can just let the car cruise on low acceleration. When you need to slow down for a traffic light, you can release the acceleration slowly and start applying the brakes to save fuel.

Car Leasing

Affordability

The option to lease often removes the concern of taking out a loan or depleting the personal savings. Before signing a contract with a dealer, it is possible to see a full breakdown of future payments including the deposit and monthly fee.

Mechanical issues

With the option to drive a brand new car off the dealership forecourt there is a lower risk of mechanical breakdown. A used car with plenty of miles and years on the clock is a significantly greater risk for mechanical issues. Also, the leasing option is certain to be packaged with a vehicle warranty to give the desired protection in the event of unexpected faults. A warranty is a great way to avoid having to spend extra money on repairs or a regular service.

Flexible contracts

Most contracts give a certain degree of flexibility to make it easy to tailor the terms to match the specific needs. For instance, it may be possible to set the preferred time-frame of the contract or the annual mileage. Other options include the ability to include vehicle servicing or maintenance.

Great choice of vehicle

When buying outright the choice of vehicle is a lot more limited because it needs to be within your affordable price range. But, with car leasing you aren’t buying outright, so the ability to find a perfect make or model is that much more feasible. If you have been after a particular car for a while, but it has been out of your price range, the option to lease the vehicle may be a great option.

Car on the Road Long

1. Change your filter regularly

Checking fluid levels regularly and changing the fluids and filters periodically can minimize the risks of breakdowns and prolong the life of the engine, transmission, cooling system and brakes.

You need to change air filters, fuel filters and oil filters on a regular basis to keep your engine performing well. In countries with high sulfur fuel, you need to change your fuel and oil filter in half the recommended time. Air filter needs to be changed every two months in rural areas and deserts, and windy and dusty countries. Most folks change their oil filter when they are draining and replacing their engine oil and fuel filter every six months.

2. Check and replace Fluids

A car is a machine and like any machine it needs oil replaced on a regular basis. Engine oil needs to be changed every 5000 miles, engine coolant flushed and replace every six months and transmission fluid every two years or every 30,000 miles whichever comes first. Flush and replace your brake fluid and power steering every two years.

Engine oil is the one that needs to be looked at regularly. A few years ago you were asked to check the oil level every time you went to the petrol pump but now it is fine if you check the engine oil level every month and fill it if it is below the safe level.

3. Drive safely

Nothing reduces a car’s value and longevity than an accident so safe driving habits are essential. Follow all traffic rules and avoid speeding. Don’t drive drunk and avoid texting and talking on mobile phone while driving. Avoid driving when you are tired and drowsy.

4. Don’t drive as much and avoid short trips

The more you drive your car, the more wear and tear it gets. If you walk as much as possible to nearby destinations, you not only improve your health, you also increase your car’s life.

A large numbers of short trips of 10 minutes and less cause a lot of wear and tear as cars don’t have the time to reach optimum operating temperature. Walk if possible or combine a number of errands for a longer trip.

5. Get annual checkup done

Find a good honest mechanic and get a thorough maintenance done at least once a year. The mechanic will check your battery, check and change your fluids and filters, check air-conditioner refrigerant, get your tires rotated and balanced and your alignment checked, change your spark plugs and replace your wipers if necessary, He will thoroughly clean up your vehicle innards and ferret out any possible problem with the car and recondition it as new.

Car Power Inverters

Single

The most cost-effective option is the single outlet inverter. They are built with a single 3-pronged outlet to accept one electronic item. The current capacity can vary between 150 watts and 200 watts. A useful benefit of this unit is its compact size, which makes it really easy to use and store. Also, the ability to power only one device at a time means there is a low risk of overloading the system. But, the single use option means the all-round use is limited and not a practical choice when multiple devices are in need of charging. If it is necessary to charge several devices, the inverter will be in use for a long time, which can put a strain on the vehicle battery.

Multiple

The Multiple outlet inverters are a lot more expensive and larger than the single outlet units. Most are built to power two devices, although there are some that have up to three and include a higher wattage capacity. This type of inverter is great on a campsite when it is necessary to power a DVD player and television at the same time. When using the multiple outlet inverters it is essential to make sure the electronic items do not exceed the accepted capacity limit of the inverter. If it does go above the maximum limit the devices may not perform correctly or simply not work at all.

USB

There are certain inverters that include one or more USB ports. This is often in conjunction with the 3-pronged outlets. Easy access to USB power is practical to charge a wide range of devices like tablet PCs, smart phones, or other gadgets powered via a USB cable. Similar to the multiple outlet inverters it is important to avoid charging devices that will exceed the maximum current rating.